🔥🔥 Delphi HP10023 Fuel Pump Hanger Assembly with Sending Unit 🔥🔥

$94.95 Buy It Now or Best Offer
free,30-Day Returns

Seller Store discountdeals_4u
(579) 99.1%,

Location: Las Vegas, Nevada
Ships to: US,
Item: 375762733349

Return shipping will be paid by:Buyer
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
EPID:74644953
OE/OEM Part Number:‎25026830, 25093498, AFS0205P, E3222, E3740S
Voltage:12 V
Manufacturer Part Number:HP10023
Delphi:Delphi

Delphi HP10023 Fuel Pump and Hanger Assembly with Sending Unit Delphi brings 80 + years of OE Heritage into each Delphi assembly, ensuring quality and fitment for each Delphi part Always be sure to check and clean fuel tank to avoid unnecessary returns Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation Rigorous OE-testing ensures the pump can withstand extreme temperatures Delphi is an original equipment brand that partners with other manufacturers to supply the parts your car was originally built with. This product is in a Delphi package, note that the part may have been manufactured by an independent Delphi supplier. Where Does Delphi Quality Come From? OE Engineered Our parts are engineered with the same stringent standards applied to the parts we make for the top global OEMs. Durability Tested Our rigorous testing ensures reliability and readiness for the road ahead. In fact, our parts are tested up to 150,000 miles and in more than 20% ethanol. For Over 80 Years Our expertise goes back to the beginning and we’re still innovating today. We’ve been a manufacturer of dependable fuel delivery parts for over 80 years. Innovative Design We utilize the latest OE technology and components to bring OE quality and durability to our fuel line and even make enhancements over some OE designs. In fact, we hold more than 30 OE-proprietary innovations and patents in fuel alone. Fueled by Innovation: Delphi’s OE DNA When it comes to choosing the parts for fuel delivery systems, reach for the brand that delivers the most advantages: Delphi. In the aftermarket, we’re best known for our fuel management program. As a world manufacturer in fuel pump technology and an OE manufacturer, we apply our high quality standards to every part we sell. Why Do Fuel Pumps Fail? OE fuel modules and hanger/senders, which house the electric fuel pump, typically operate for 7-10 years before failure, depending on a variety of circumstances. Premature failures can be caused by: Extreme hot/cold environments Contaminated fuel, which can cause rust or corrosion Excessively running a vehicle on an empty tank. Running near empty does not keep the fuel pump fully submerged and can cause the pump to overheat. 21% of returned fuel pumps failed because they operated in a contaminated system. Before installing a new pump, make sure to visually inspect for dirt, rust or discoloration. Tech Tips Start Your New Pump in a Clean Environment Replacing the fuel pump strainer is required, but it is not enough if the tank is dirty. Make sure to inspect and clean the fuel tank as well. Clogged filters are a leading cause of premature pump failure, so replace the fuel filter if it is not internal to the assembly. Internal filters are not serviced separately. A Pressure Test is Not Enough to Condemn the Pump High fuel pressure can often be attributed to a fuel pressure regulator issue or a restriction in the return line. The engine may run rich or fuel trims may be elevated. Low fuel pressure can be caused by insufficient power or ground to the fuel pump or a malfunctioning fuel pressure regulator. Contamination in the system can cause restrictions to the fuel feed lines, fuel strainer, or fuel filter. No pressure can be due to a faulty relay, fuse, wire harness, or oil pressure switch, tripped inertia switch, or dried test fluid. What to Check Prior to Repair The pump may not necessarily be the cause of fuel-related driveability problems or failures. So make sure to: 1. Confirm there is fuel in the fuel tank 2. Check fuel pressure 3. Check flow 4. Check fuel filter and pressure regulator 5. Perform a voltage drop test 6. Check electrical connections 7. Clean tank and inspect for debris What Tools Will I Need? Safety glasses and gloves are always recommended. Delphi also recommends a digital voltmeter, pressure gauge, and graduated cylinder. You should always have a fire extinguisher on hand. Safety first Never smoke or work near anything that could cause a spark or ignite fuel, such as pilot lights or incandescent light bulbs. Work in a well-ventilated area. Keep clean-up materials on hand, and clean up any spills immediately. Always relieve fuel pressure prior to opening fuel systems. Store fuel in an approved container like a gas caddy or gas can. And More Delphi also offers diesel feed/transfer pumps, hanger senders, fuel strainers/filters, mechanical fuel pumps and fuel accessories like wire harnesses, lock rings, check valves and more.

Frequently Asked Questions About 🔥🔥 Delphi HP10023 Fuel Pump Hanger Assembly with Sending Unit 🔥🔥 in My Website

dyreshoppen.no is the best online shopping platform where you can buy 🔥🔥 Delphi HP10023 Fuel Pump Hanger Assembly with Sending Unit 🔥🔥 from renowned brand(s). dyreshoppen.no delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 🔥🔥 Delphi HP10023 Fuel Pump Hanger Assembly with Sending Unit 🔥🔥 on dyreshoppen.no?

Frequently Asked Questions About 🔥🔥 Delphi HP10023 Fuel Pump Hanger Assembly with Sending Unit 🔥🔥 in My Website

What are the best-selling 🔥🔥 Delphi HP10023 Fuel Pump Hanger Assembly with Sending Unit 🔥🔥 on dyreshoppen.no?

Legg igjen en kommentar